Teltonika TRB145

Cellular module: 4G LTE Cat 1 up to 10 DL/5 UL Mbps; 3G up to 384 DL/384 UL kbps; 2G up to 296 DL/236.8 UL kbps
3GPP Release: Release 12
Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading Unstructured Supplementary Service Data messages
Block/Allow List: Operator Block/Allow List (per country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape lock, display of status of used tapes
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile operator and device in LAN
Passthrough: Gateway assigns its mobile WAN IP address to another device in the LAN

Routing: Static routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT
VoIP passthrough support: NAT helper functions for H.323 and SIP alg protocols, enabling proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Monitoring
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on/off, change transmission speed, etc.
Network topology: Visual representation of your network showing which devices are connected to each other
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS-over-HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network Backup: Mobile, VRRP, wired options – all can be used as automatic Failover
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: Protection against DDoS attacks (SYN flood, SSH, HTTP/HTTPS attacks), protection against port scanning (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scanning)
VLAN: Port and tag-based VLAN separation
Mobile data quota control: Mobile data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to allow only specified websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Support for Let's Encrypt and SCEP for certificate generation

VPN: OpenVPN: Flera klienter och en server kan köras samtidigt, 27 krypteringsmetoder
OpenVPN-kryptering: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, med 14 krypteringsmetoder för IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: Stöd för GRE-tunnel och GRE-tunnel över IPsec
PPTP, L2TP: Klient- och serverinstanser kan köras samtidigt, stöd för L2TPv3 och L2TP över IPsec
Stunnel: Proxy utformad för att lägga till TLS-kryptering till befintliga klienter och servrar utan ändringar i programkoden
DMVPN: Metod för att bygga skalbara IPsec-VPN:er, stöd för fas 2 och 3 samt Dual Hub
SSTP: Stöd för SSTP-klientinstans
ZeroTier: Stöd för ZeroTier VPN-klient
WireGuard: Stöd för WireGuard VPN-klient och -server
Tinc: Tinc erbjuder kryptering, autentisering och komprimering i sina tunnlar. Stöd för klient och server

Supported modes: Router
Supported connection types: RS485, TCP
Configuration options: Support for multiple BACnet/IP interfaces, network number assignment, pre-configured BDT entries for BBMD (BACnet Broadcast Management Device)

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, RTU (RS485)
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router, and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB or LSB first), 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols and send them all to a single server; Custom LUA scripting that allows scripts to use the router's "Data to Server" feature

Modbus MQTT gateway: Allows sending commands and receiving data from MODBUS server via an MQTT broker

Supported modes: Station, Outstation
Supported connection types: TCP, RTU (RS485)

DLMS support: DLMS – standard protocol for exchanging meter data for utilities
Supported modes: Client
Supported connection types: TCP, RTU (RS485)
COSEM: Enables scanning of COSEM objects in meters for automatic identification and configuration

Teltonika Networks Web API (beta) support: Extend the capabilities of your device by using a set of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Enables monitoring of: device model, version and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has actions for reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to server to send all available parameters to the cloud. Supports Direct method which allows to run RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables automatic device provisioning to IoT Hubs without manual intervention
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality

CPU: ARM Cortex-A7 1.2GHz
RAM: 128MB, DDR2
FLASH storage: 512 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++ and Python in Package Manager
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and website by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: Package Manager is a service used to install additional software on the device

Configurable I/O: 2 x configurable inputs/outputs. Digital input 0–5 V detected as logic low, 8–30 V detected as logic high. Open collector output, max 30 V, 300 mA (Configurable inputs/outputs not available in TRB1452***)
Output control: HTTP POST/GET, Schema
Events: Email, RMS, SMS
I/O Juggler: Ability to set certain I/O conditions to initiate event

Connector: 4-pin industrial DC power connector
Input voltage: 9 – 30 VDC, with reverse polarity protection; overvoltage protection >31 VDC for max. 10 microseconds
Power consumption: Below 5 W

I/O: 2 x configurable I/O pins on 4-pin power connector (I/O not available in TRB1452***)
Status LED: 3 x connection type LED, 5 x signal strength LED, 1 x power LED
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V
Power: 1 x 4-pin power connector
Antenna: 1 x SMA connector for LTE
RS485: 1 x 6-pin terminal block for 2-wire or 4-wire interface
Reset: Button for restart, reset to user defaults, or factory reset
USB: 1 x virtual network interface via micro USB

Housing material: Aluminum housing
Dimensions (W x H x D): 74.5 x 25 x 64.4 mm
Weight: 130g
Mounting options: DIN rail, wall mount, flat surface (all require additional mounting kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulations: CE, UKCA, EAC, UCRF, ANRT, Kenya, ICASA, Anatel, Arcotel, NOM, RCM, Giteki, NTC, E-mark, CB, RoHS, REACH
Operator: Deutsche Telekom AG

Standards: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
Radiation immunity: EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge immunity (AC mains power port): EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004

Standards: EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1

Standards: CE: EN 62368-1:2014 + A11:2017, EN IEC 62232:2017, EN 50385:2017
RCM: AS/NZS 62368.1:2018

2 års fabriksgaranti