Teltonika TRB143

Cellular module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
3GPP Release: Release 11
Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape lock, display of used tape status
SIM PIN management: SIM PIN management allows you to set, change or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Gateway assigns its mobile WAN IP address to another device on the LAN

ETH: 1 x ETH port, 10/100/1000 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper, enabling correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all your firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable each port, turn auto-configuration on or off, change transmission speed, and more
Network topology: Visual representation of your network, showing which devices are connected to which other devices
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default customizable themes and the ability to upload and download custom hotspot themes
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Traffic priority queuing based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS lookup by routing DNS requests over HTTPS
Network backup: VRRP, wired options, each can be used as automatic failover, mobile
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack protection: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flag, FIN scan)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limitation, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to allow only specified websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client and server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changes to the program code
DMVPN: Method for building scalable IPsec VPNs, phase 2 and phase 3 and dual hub support
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol support: The M-Bus interface can support up to 250 client devices and can supply up to 6 client devices with power.
M-Bus over IP: M-Bus over IP network for remote communication of meter data from utility meters.
Advanced features: Scanning of connected devices, configuration of primary/secondary addresses, data filtering

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send everything to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality.

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS server via MQTT broker.

Supported modes: Station, Outstation
Supported connection: TCP

DLMS support: DLMS – standard protocol for exchanging meter data from utility meters
Supported modes: Client
Supported connection types: TCP
COSEM: Ability to scan COSEM objects in meters for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB INTERFACE: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, brute force protection
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Allows monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Allows monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to server to send all available parameters to the cloud. Supports Direct method which allows to make RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service for automatic and easy device registration to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality

CPU: ARM Cortex-A7 1.3GHz
RAM: 256MB, DDR3
FLASH storage: 512 MB, SPI Flash

WEB INTERFACE: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Firmware update
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing existing configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and website application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

Input: 1 x digital input, 0–6 V detected as logic low, 8–30 V detected as logic high
Output: 1 x digital output, open collector output, max 30 V, 300 mA
Events: Email, RMS, SMS
I/O juggler: Ability to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage range: 12 – 30 V DC
PoE (passive): Ability to supply power via LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 12 – 30 V DC
Power consumption: Sleep: 3 W, Max: 6 W

Ethernet: 1 x RJ45 port, 10/100/1000 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 3 x connection type status LEDs, 3 x connection strength status LEDs, 2 x Ethernet status LEDs, 1 x power LED
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V
Power: 1 x 4-pin power connector
Antenna: 1 x SMA for LTE
Reset: Restart/user reset/factory reset button
M-Bus: 1 x M-Bus interface

Housing material: Aluminum
Dimensions (W x H x D): 74.5 x 25 x 73 mm
Weight: 145g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

Regulations: CB, CE, UKCA, RoHS, REACH, WEEE

ESD: EN 61000-4-2:2009
Radiation immunity: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012

Standards: IEC 62368-1:2018

2 års fabriksgaranti