Teltonika TRB140

Cellular module: 4G LTE Cat 4 up to 150 Mbps download / 50 Mbps upload, 3G up to 21 Mbps download / 5.76 Mbps upload, 2G up to 236.8 kbps download / upload
3GPP Release: Release 11
Status: IMSI, ICCID, operator, operator status, data traffic status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, automatic SMS reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator block/allow list (by country or specific operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape locking, display of currently used tape
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Automatic APN detection
Bridge: Direct connection (bridge) between mobile operator and device in the LAN network
Passthrough: The gateway assigns its mobile WAN IP address to another device on the LAN network

ETH: 1 x Ethernet port, 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3az standards, supports auto MDI/MDIX cross-connect

Routing: Static routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN
VoIP Passthrough Support: Support for H.323 and SIP-ALG protocols (NAT helper functions) for proper forwarding of VoIP traffic
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Auditing
Firewall: Port forwarding, traffic rules, custom rules, TTL customization
Firewall Status Page: View all firewall statistics, rules, and counters
Port Management: View device ports, enable or disable them, enable/disable auto-configuration, change transmission speed, and more
Network topology: Visual representation of your network, showing which devices are connected to each other
Hotspot: Captive portal (hotspot), internal/external Radius server, MAC authentication via Radius, SMS authentication, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, restrictions for individual users or groups, user management, 9 preset customizable themes and the ability to upload/download your own hotspot themes
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static addresses: MAC address with wildcard
QoS / Smart Queue Management (SQM): Traffic prioritization by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Mobile network, VRRP, wired options – all can be used as automatic failover
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic Management: Real-time monitoring, wireless network signal strength graph, data traffic usage history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, authentication of internal and external RADIUS users, blocking of IP addresses and login attempts, time-based blocking of logins, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDOS protection (SYN flood protection, protection against SSH and HTTP/HTTPS attacks), protection against port scans (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scans)
VLAN: Port and tag-based VLAN separation
Mobile data control: Mobile data limitation, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to only allow specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Support for Let's Encrypt and SCEP for automatic certificate generation

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, support for GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changing program code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Support for both client and server

Supported modes: Client, Server
Supported connection types: TCP

Stödda lägen: Server, Klient
Stödda anslutningstyper: TCP
Anpassade register: MODBUS TCP-anpassade registerblocksförfrågningar som läser/skrivs till en fil i routern och kan användas för att utöka MODBUS TCP-klientens funktionalitet
Stödda dataformat: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB eller LSB först), 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols and send them to a single server. Use custom LUA scripts to leverage the router's "Data to Server" functionality.

Modbus MQTT Gateway: Enables sending commands and receiving data from a MODBUS server via an MQTT broker.

Supported modes: Station, Outstation
Supported connection: TCP

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP
COSEM: Enables scanning of the meter's COSEM object for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a number of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB INTERFACE: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Administration API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Enables monitoring of: device model, version and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct Method which allows RutOS API calls to be executed via IoT Hub. Also has Plug and Play integration with Device Provisioning Service for easy automatic device registration to IoT Hub
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API with AWS Jobs functionality

CPU: ARM Cortex-A7 1.2GHz
RAM: 128MB, DDR2
FLASH storage: 512 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++ and Python in Package Manager
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service for installing additional software on your device

Input: 1 x digital input, 0–6 V detected as logic low, 8–30 V detected as logic high
Output: 1 x digital output, open collector output, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Allows you to set certain I/O conditions to initiate an event

Connector: 4-pin industrial DC power connector
Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10 µs max
PoE (passive): Ability to power the device via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption: < 5 W

Ethernet: 1 x RJ45 port, 10/100/1000 Mbps
I/O: 1 x Digital input, 1 x Digital output on 4-pin power connector
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1 x power LED
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V
Power: 1 x 4-pin power connector
Antenna: 1 x SMA for LTE
USB: 1 x Virtual Network Interface via micro USB
Reset: Button for restart, reset to user defaults and factory reset

Housing material: Aluminum housing
Dimensions (W x H x D): 74.5 x 25 x 64.4 mm
Weight: 134g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory: CE, UKCA, EAC, UCRF, Anatel, NOM, RCM, Giteki, CITC, Kenya, ICASA, Anatel, Arcotel, NBTC, NTC, IMDA, SIRIM, CB, WEEE, RoHS, REACH
Operator: Deutsche Telekom AG
Vehicle: ECE R10 (E-mark)

Standards: EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN IEC 61000-3-2:2019 + A1:2021, EN 301 489-1 V2.2.3, EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiation immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (AC mains): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN IEC 61000-4-11:2020

Standards: EN 301 511 V12.5.1, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.2.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62232:2020
RCM: AS/NZS 62368.1:2018
CB: IEC 62368-1:2018

2 års fabriksgaranti