Teltonika RUTXR1

Cellular module: 4G LTE Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps
3GPP Release: Release 11
SIM switch: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fails, SIM idle protection
Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC
SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape lock, display of used tape status
SIM idle protection service: Ability to configure the router to periodically switch to unused SIM card and establish data connection to prevent SIM card blocking
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transfer rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast handover, Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: ESSID in stealth mode
Wi-Fi users: Up to 150 simultaneous connections
Wireless connectivity features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource metering (802.11k)
Wireless MAC Filter: Allow and Block List
Wireless QR code generator: When scanned, the user automatically enters the network without having to enter login credentials
TravelMate: Forwards the Wi-Fi hotspot landing page to a subsequent connected device

WAN: 1 x WAN port 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Fiber: 1 x SFP port (cannot be used simultaneously with Ethernet WAN port)
LAN: 4 x LAN ports, 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper for correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on or off, change transmission speed, and more
Network topology: Visual representation of the network that shows which devices are connected to which other devices
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default customizable themes and the ability to upload and download custom hotspot themes
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supports >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network Backup: Wi-Fi WAN, Mobile, Fiber, VRRP, Wired options, all can be used as automatic Failover
Load Balancing: Balancing internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
VRF Support: Initial support for Virtual Routing and Forwarding (VRF)
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

802.1x: Port-based network access control client
Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scanning prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scanning attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data volume limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to specify only allowed websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3, L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changes to the program code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and Phase 3 as well as Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open-source WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB or LSB first), 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extracts parameters from multiple sources and different protocols, and sends them to a single server. Custom LUA scripting allows scripts to use the router's Data to Server feature.

Modbus MQTT Gateway: Enables sending commands to and receiving data from a MODBUS server via an MQTT broker.

Supported modes: Station, Outstation
Supported connections: TCP, USB

DLMS support: DLMS – standard protocol for data exchange from electricity meters
Supported modes: Client
Supported connection types: TCP, USB
COSEM: Enables scanning of the electricity meter's COSEM object for automatic discovery and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a number of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
Email: Receive status alerts via email for various services
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, brute force protection
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity - Cloud of Things: Enables monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows RutOS API calls to be made on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables automated device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call device APIs with AWS Jobs functionality

CPU: Quad-core ARM Cortex A7, 717 MHz
RAM: 256MB, DDR3
FLASH storage: 256 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++, and Python, Java via Package Manager
Development tools: SDK package with build environment provided
GPL Customization: You can create your own customized and branded firmware and web application by changing colors, logos and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Connector: 2 x 4-pin industrial DC power connectors for main and redundant power source
Input voltage: 9 - 50 VDC, reverse polarity protection, surge/transient protection
Power consumption: Sleep: < 3 W, Max: 18 W

Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
Status LEDs: 2 x WAN type, 2 x mobile connection type, 3 x mobile signal strength, 2 x active SIMs, 10 x Ethernet status, 2 x console status, 2 x power
SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power: 2 x 4-pin DC connector
Antenna: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi
USB: 1 x USB A port for external devices
Reset: Restart/User Default Reset/Factory Reset Button
Grounding: 1 x grounding screw, 1 x lock
Fiber: 1 x SFP port

Casing material: All steel casing
Dimensions (W x H x D) 272 x 42.6 x 122.6 mm
Weight: 1093g
Mounting options: Rack mounting kit

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing

Regulations: CE, UKCA, EAC, UCRF, CITC, ANRT, RCM, NTC, CB

Standards: EN 55032:2015 + A11:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1:V2.2.3, EN 301 489-3:V2.1.1, EN 301 489-17:V3.2.4, Draft EN 301 489-52:V1.1.2
ESD: EN 61000-4-2:2009
Radiated immunity: EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge immunity (AC mains power port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN IEC 61000-4-11:2020

Standards: EN 300 328:V2.2.2, EN 301 893:V2.1.1, EN 300 440:V2.2.1, EN 301 908-1:V13.1.1, EN 301 908-2:V13.1.1, EN 301 908-13:V13.1.1

Standards: CE: EN 62368-1:2014 + A11:2017, EN 62232:2017, EN 50385:2017
UL/CSA Safety: UL 62368-1 (3rd ed., rev. December 13, 2019), CAN/CSA C22.2 No. 62368-1:19 (3rd ed., rev. December 13, 2019)
CB: IEC 62368-1:2018

2 års fabriksgaranti