Teltonika RUTX14

Cellular module: 4G LTE Cat 12 up to 600 DL/150 UL Mbps; 3G up to 42 DL/11.2 UL Mbps
3GPP Release: Release 12
SIM switching: 2 SIM cards, automatic switching in case of: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection error, SIM idle protection
Status: IMSI, ICCID, operator, operator state, data connection status, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or individual operator)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape lock, display of used tape status
SIM idle protection: Provides the ability to configure the router to periodically switch to the unused SIM card and establish data connection to prevent the SIM card from being blocked
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Auto APN
Bridge: Direct connection (bridge) between mobile operator and device on LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transfer rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast handover, Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto encryption modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: ESSID stealth mode
Wi-Fi users: Up to 150 simultaneous connections
Wireless connectivity features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource metering (802.11k)
Wireless MAC filter: Allow list, block list
Wireless QR code generator: When scanned, the user is automatically connected to the network without having to enter login details
TravelMate: Forwards the Wi-Fi hotspot landing page to a subsequent connected device

Bluetooth 4.0: Bluetooth low energy consumption
(LE): For short-range communication

WAN: 1 x WAN port 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 4 x LAN ports, 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, support auto MDI/MDIX crossover

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper, enabling correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all firewall statistics, rules, and counters
Port Management: View device ports, enable and disable each one, turn auto-configuration on or off, change transfer speed, and more
Network topology: Visual representation of the network that shows which devices are connected to which
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 pre-selected customizable themes and the ability to upload and download your own hotspot themes
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Traffic prioritization via queue based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supports >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network Backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each can be used as automatic Failover
Load Balancing: Balances internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
VRF support: Basic virtual routing and forwarding (VRF) support
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

802.1x: Port-based network access control client
Authentication: Distributed key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack protection: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scanning attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to specify only allowed websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changes to the program code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and Phase 3 as well as Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality.

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker.

Supported modes: Station, Outstation
Supported connection: TCP, USB

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP, USB
COSEM: Ability to scan the meter's COSEM object for automatic discovery and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, Status, Mobile data on/off, Output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Allows monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Allows monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which enables running RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables fully automated device registration to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Supports jobs: Call the device API with AWS Jobs functionality

CPU: Quad-core ARM Cortex A7, 717 MHz
RAM: 256MB, DDR3
FLASH storage: 256 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++, and Python, Java in the package manager
Development tools: SDK package with build environment provided
GPL Customization: You can create your own customized, branded firmware and website application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol
Server Software: Supported Server Software TAVL, RMS Geofence:
Configurable multiple geofence zones

Data speed: USB 2.0
Applications: Samba sharing, USB-to-serial
External devices: Ability to connect external hard drive, USB memory, additional modem, printer, USB-serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital input, 0–6 V registered as logic low, 8–30 V registered as logic high
Output: 1 x digital output, open collector output, max 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Ability to set certain I/O conditions to trigger event

Connector: 4-pin industrial DC power connector
Input voltage: 9 - 50 VDC, protection against incorrect connection and voltage spikes
PoE (passive): Ability to supply power via the LAN1 port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
Power consumption: Sleep: < 4 W, Max: < 22 W

Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 2 x connection status LEDs, 3 x signal strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x power LED, 2 x 2.4G and 5G Wi-Fi LEDs
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM card holder
Power: 1 x 4-pin power connector
Antenna: 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Buttons for restart, user default reset, and factory reset
Other: 1 x grounding screw

Housing material: Full aluminum housing
Dimensions (W x H x D): 132 x 44 x 95 mm
Weight: 515g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Drifttemperatur: -40 °C till 75 °C
Drifthumidity: 10 % till 90 % utan kondens
Skyddsklass (Ingress Protection Rating): IP30

Regulations: CE, UKCA, RCM, UCRF, CITC, Kenya, ICASA, ANRT, NTC, SIRIM, GCF, CB, RoHS, REACH

Standards: EN 55032:2015 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Draft EN 301 489-19 V2.2.0, Draft EN 301 489-52 V1.1.2
ESD: EN 61000-4-2:2009
Radiation immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (AC mains port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN IEC 61000-4-11:2020

Standards: EN 300 328 V2.2.2, EN 301 893 V2.1.1, EN 300 440 V2.2.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.1.1

Standards: CE: EN 62368-1:2014 + A11:2017, EN 62232:2017, EN 50385:2017
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), CAN/CSA C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
CB: IEC 62368-1:2018

2 års fabriksgaranti