Teltonika RUTX12

Cellular module: 2 x 4G LTE Cat 6 up to 300 Mbps download / 50 Mbps upload; 3G up to 42 Mbps download / 5.76 Mbps upload
3GPP version: Release 12
Status: IMSI, ICCID, operator, operator status, data traffic status, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, email to SMS, SMS to email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator block or allow list (per country or specific operators)
Multiple PDNs: Ability to use different PDNs for multiple network connections and services
Tape management: Tape locking, display of currently used tape
SIM sleep protection service: Enables periodic switching to unused SIM card and data traffic connection to prevent SIM blocking
SIM PIN Management: Enable, change, or disable SIM card PIN
APN: Automatic APN configuration
Bridge: Direct connection (bridge) between mobile operator and device in LAN
Passthrough: The router assigns its mobile WAN IP address to another device in the LAN

Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transitions, Access Point (AP), Client mode (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic cipher management, client splitting, EAP-TLS with PKCS#12 certificate, option to disable automatic reconnection, 802.11w Protected Management Frames (PMF)
SSID/ESSID: Stealth mode for ESSID (hide network name)
Wi-Fi users: Supports up to 150 simultaneous connections
Wireless features: Wireless mesh networking (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio capacity measurement (802.11k)
Wi-Fi MAC Filter: Allow List, Block List
QR code generator for Wi-Fi: Users automatically connect to the network by scanning the QR code – no manual login required
TravelMate: Forwards the Wi-Fi hotspot login page to the next connected device

Bluetooth 4.0: Bluetooth Low Energy (LE) for short-range communication

WAN: 1 x WAN port, 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 4 x LAN ports, 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough: Support for H.323 and SIP-ALG NAT aids that enable proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on/off, change transmission speed, etc.
Network topology: Visual representation of the network that shows how devices are connected to each other
Hotspot: Captive portal, internal/external Radius server, MAC authentication via Radius, SMS authentication, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual restrictions, 9 standard themes that can be customized, ability to upload/download your own themes
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases (MAC with wildcards)
QoS / Smart Queue Management (SQM): Prioritization of traffic based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: Encrypted DNS resolution by routing DNS requests over HTTPS
Network backup: Wi-Fi WAN, cellular, VRRP and cable – can be used as automatic failover
Load Balancing: Balances internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
VRF Support: Initial support for Virtual Routing and Forwarding
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

802.1x: Port-based authentication for network access
Authentication: Pre-shared keys, digital certificates, X.509 certificates, TACACS+, authentication via internal and external RADIUS users, IP and login attempts can be blocked, timed login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited configuration via CLI, support for DMZ, NAT, NAT-T and NAT64
Attack security: DDOS protection (SYN flood protection, protection against SSH, HTTP and HTTPS attacks), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scans)
VLAN: Separation with port- and tag-based VLANs
Mobile data control: Mobile data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to allow only specific pages
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Support for Let's Encrypt and SCEP for certificate issuance

OpenVPN: Multiple clients and one server can run simultaneously. Support for 27 different encryption methods.
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192,
AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: Support for XFRM, IKEv1, IKEv2, with 14 encryption methods:
3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16
GRE: Support for GRE tunnel and GRE over IPsec
PPTP, L2TP: Client and server instances can run simultaneously. Support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy that adds TLS encryption to existing clients and servers without code changes
DMVPN: Method for building scalable IPsec VPN solutions. Support for Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard as both a VPN client and server
Tinc: Support for Tinc which offers encryption, authentication and compression in its tunnels. Client and server support
Tailscale: Support for Tailscale, which offers speed, stability, and simplicity over traditional VPN solutions. Encrypted point-to-point connections via the WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB or LSB first, 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols and send them to a single server. Custom LUA scripting allows scripts to leverage the router's Data to Server feature.

Modbus MQTT Gateway: Enables sending commands and receiving data from a MODBUS server via an MQTT broker.

Supported modes: Station, Substation
Supported connections: TCP, USB

DLMS support: DLMS – standard protocol for data transfer from electricity meters
Supported modes: Client
Supported connections: TCP, USB
COSEM: Ability to scan COSEM objects in meters for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, see the documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications about available firmware update, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity - Cloud of Things: Enables monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows RutOS API calls to be made via IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables zero-touch device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Job support: call the device API via AWS Jobs functionality

CPU: Quad-core ARM Cortex A7, 717 MHz
RAM: 256MB, DDR3
FLASH storage: 256 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++, Python, Java via Package Manager
Development tools: SDK package with build environment available
GPL Customization: You can create your own customized, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service for installing additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol
Server Software: Supported Server Software: TAVL, RMS
Geofence: Configurable multiple geofence zones

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external hard drive, USB memory, additional modem, printer, USB-serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital input, 0 - 6 V is registered as logic low, 8 - 30 V is registered as logic high
Output: 1 x digital output, open collector output, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Ability to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage range: 9 - 50 VDC, reverse polarity protection, surge/transient protection
PoE (passive): Ability to supply power via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
Power consumption: Sleep: < 4 W, Max: < 22 W

Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 4 x connection status LEDs, 6 x signal strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x power LED, 2 x 2.4G and 5G Wi-Fi LEDs
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM card holders
Power: 1 x 4-pin power connector
Antennas: 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Restart/User Default/Factory Reset buttons
Other: 1 x grounding screw

Housing material: Full aluminum housing
Dimensions (W x H x D): 132 x 44.2 x 95.1 mm
Weight: 540g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory: CE, UKCA, EAC, UCRF, CITC, ANRT, ICASA, NOM, Anatel, RCM, SIRIM, NTC, NBTC, CB, E-mark

Standards: EN 55032:2015, EN 55035:2017, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1:V2.2.3, EN 301 489-3 V2.1.1, EN 301 489-17:V3.2.4, EN 301 489-19 V2.1.1, Draft EN 301 489-52:V1.1.0
ESD: EN 61000-4-2:2009
Radiation immunity: EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge immunity (AC mains connection): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004 + A1:2017

Standards: EN 300 328:V2.2.2, EN 300 440:V2.2.1, EN 301 893 V2.1.1, EN 301 908-1:V13.1.1, EN 301 908-2:V13.1.1, EN 301 908-13:V13.1.1, EN 303 413 V1.1.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, RCM: AS/NZS 62368.1:2018, CB: IEC 62368-1:2018

2 års fabriksgaranti