Teltonika RUTX09

Cellular module: 4G LTE Cat 6 up to 300 DL / 50 UL Mbps; 3G up to 42 DL / 5.76 UL Mbps
3GPP Release: Release 12
SIM switching: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection error, SIM inactive protection
Status: IMSI, ICCID, operator, operator state, data connection status, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape locking, display of used tape status
SIM Inactive Protection Service: Provides the ability to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the L

WAN: 1 x WAN port 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 3 x LAN ports, 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Statisk routing, Dynamisk routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policybaserad routing
Nätverksprotokoll: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP Passthrough-stöd: H.323 och SIP-ALG protokoll NAT-hjälpare, som möjliggör korrekt routing av VoIP-paket
Anslutningsövervakning: Ping Reboot, Wget Reboot, Periodisk omstart, LCP och ICMP för länkinspektion
Brandvägg: Port forwarding, trafikregler, anpassade regler, TTL-mål anpassning
Brandväggsstatussida: Visa all brandväggsstatistik, regler och regelräknare
Porthantering: Visa enhetsportar, aktivera och inaktivera var och en, slå på eller av automatisk konfiguration, ändra överföringshastighet och mer
Nätverkstopologi: Visuell representation av nätverket som visar vilka enheter som är anslutna till vilka andra enheter
Hotspot: Captive portal (hotspot), intern/extern Radius-server, Radius MAC-autentisering, SMS-auktorisation, SSO-autentisering, intern/extern landningssida, walled garden, användarskript, URL-parametrar, användargrupper, individuella användar- eller gruppbegränsningar, användarhantering, 9 förinställda anpassningsbara teman samt möjlighet att ladda upp och ladda ner egna hotspot-teman
DHCP: Statisk och dynamisk IP-tilldelning, DHCP-relä, DHCP-serverkonfiguration, status, statiska bindningar: MAC med wildcards
QoS / Smart Queue Management (SQM): Trafikprioritering baserad på källa/destination, tjänst, protokoll eller port, WMM, 802.11e
DDNS: Stödjer >25 tjänsteleverantörer, andra kan konfigureras manuellt
DNS över HTTPS: DNS över HTTPS-proxy som möjliggör säker DNS-upplösning genom att routa DNS-förfrågningar över HTTPS
Nätverksbackup: Wi-Fi WAN, Mobil, VRRP, Trådbundet – var och en kan användas som automatisk failover
Lastbalansering: Fördela internettrafik över flera WAN-anslutningar
SSHFS: Möjlighet att montera fjärrfilsystem via SSH-protokoll
VRF-stöd: Initialt stöd för Virtual Routing and Forwarding (VRF)
Trafikhantering: Realtidsövervakning, trådlösa signaldiagram, historik över trafikförbrukning

802.1x: Port-based network access control for client
Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flag, FIN scanning attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data quota, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to allow only specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client and server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy that adds TLS encryption to existing clients and servers without changes to the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open-source WireGuard protocol

UA supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send everything to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connections: TCP, USB

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP, USB
COSEM: Ability to scan the meter's COSEM object for automatic detection and configuration

Teltonika Networks Web API (beta) support:
Extend the capabilities of your device by using a set of configurable API endpoints to retrieve or modify data. For more information, please see the documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Möjliggör övervakning av WAN-typ, WAN-IP, mobiloperatörens namn, mobilsignalsstyrka, mobilnätverkstyp
Cumulocity – Cloud of Things: Möjliggör övervakning av enhetsmodell, revision och serienummer, WAN-typ och IP, mobilcell-ID, ICCID, IMEI, anslutningstyp, operatör, signalstyrka. Har åtgärder för omstart och firmwareuppgradering
Azure IoT Hub: Kan konfigureras med Data till server för att skicka alla tillgängliga parametrar till molnet. Stödjer direktmetoder som tillåter att RutOS API-anrop utförs via IoT Hub. Har också Plug and Play-integration med Device Provisioning Service för automatisk enhetsprovisionering (zero-touch) till IoT Hub
AWS IoT Core: Verktyg för att interagera med AWS molnplattform. Jobbstöd: Anropa enhetens API med hjälp av AWS Jobs-funktionalitet

CPU: Quad-core ARM Cortex A7, 717 MHz
RAM: 256MB, DDR3
FLASH storage: 256 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Firmware Over-The-Air Update
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: Full factory reset that restores all system settings, including IP address, PIN, and user data to the manufacturer's default configuration

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software: Supported server software TAVL, RMS
Geofencing: Configurable multiple geofence zones

Speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Possibility to connect external HDD, flash memory, extra modem, printer, USB-serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital input, 0–6 V detected as logic low, 8–30 V detected as logic high
Output: 1 x digital output, open collector output, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O juggler: Ability to set certain I/O conditions to initiate event

Connector: 4-pin industrial DC power connector
Input voltage range: 9 - 50 VDC, reverse polarity protection, surge/transient protection
PoE (passive): Ability to power via LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
Power consumption: Max 9 W

Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 3 x WAN type, 2 x mobile connection types, 5 x mobile signal strength, 8 x LAN status, 3 x WAN status, 1 x power
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM card holders
Power: 1 x 4-pin power connector
Antenna: 2 x SMA for LTE, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Restart/Custom Reset/Factory Reset button

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

Regulatory: CE, UKCA, EAC, UCRF, CITC, ANRT, ICASA, NOM, RCM, IMDA, NTC, E-mark, UL/CSA Safety, CB, RoHS, REACH
Operator: Deutsche Telekom AG

Standards:
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN 301 489-1 V2.2.3
Draft EN 301 489-19 V2.2.0
EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiation immunity: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge protection (AC mains connection): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004

Standards:EN 303 413 V1.2.1
EN 301 908-1 V15.1.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.1.1

Standards: CE: EN 62368-1:2014 + A11:2017, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 60950.1:2015
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd edition, revised December 13, 2019)
CAN/CSA C22.2 No. 62368-1:19 (3rd edition, revised December 13, 2019)

2 års fabriksgaranti