Teltonika RUTM11

Cellular module: 4G LTE Cat 6 up to 300 Mbps download / 50 Mbps upload;
3G up to 42 Mbps download / 5.76 Mbps upload
3GPP version: Release 12
SIM switching: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection failed, SIM idle
Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator Block/Allow List (by country or specific operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape locking, display of used tapes
SIM Sleep Protection Service: Allows you to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked.
SIM PIN management: Support for setting, changing or disabling SIM card PIN
APN: Automatic APN configuration
Bridge: Direct connection (bridge) between mobile operator and device in LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transfer rates up to 867 Mbps (Dual Band, MU-MIMO)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE;
AES-CCMP, TKIP, automatic cipher modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: Support ESSID stealth mode (hidden SSID)
Wi-Fi users: Up to 150 simultaneous connections
Wireless connectivity features Wireless mesh networking (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio source metering (802.11k)
Wi-Fi MAC Filter: Allow List, Block List
QR code generator for Wi-Fi: When scanned, the user automatically connects to the network without having to enter login details
TravelMate: Forwards the Wi-Fi hotspot login page to a subsequent connected device

WAN: 1 x WAN port 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX cross-connect
LAN: 3 x LAN ports, 10/100/1000 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, support auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-ALG NAT helper functions, enabling correct routing of VoIP packets
Connection monitoring: Ping Reboot, Wget Reboot, periodic reboot, LCP and ICMP for link auditing
Firewall: Port forwarding, traffic rules, custom rules, TTL target adjustment
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable/disable them, turn auto-configuration on/off, change transmission speed, etc.
Network topology: Visual representation of your network showing which devices are connected to each other
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcard
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS: Network Backup
Wi-Fi WAN, cellular, VRRP, wired options, each can be used for automatic failover
Load Balancing: Balance Internet traffic across multiple WAN connections
Hotspot: Captive portal, internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user/group restrictions, user management, 9 customizable themes and the ability to upload/download your own hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol
VRF Support: Initial support for Virtual Routing and Forwarding (VRF)
Traffic management: Real-time monitoring, wireless signal graphs, traffic consumption history

802.1x: Port-based authentication for network access
Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, authentication via internal and external RADIUS users, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack protection: DDOS protection (SYN flood, SSH attacks, HTTP/HTTPS attacks), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile data control: Mobile data quota, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to only allow specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Support for certificate generation via Let's Encrypt and SCEP

OpenVPN: Multiple clients and one server can run simultaneously, support for 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods:
3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16
GRE: Support for GRE tunnel and GRE over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy that adds TLS encryption to existing clients and servers without changing the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPN solutions. Encrypted point-to-point connections using the open WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB or LSB first)
32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extracts parameters from multiple sources and different protocols and sends them all to a single server; Custom LUA scripting allows scripts to use the router's Data to Server functionality

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connections: TCP, USB

DLMS support: DLMS – standard protocol for exchanging data from electricity meters
Supported modes: Client
Supported connection types: TCP, USB
COSEM: Ability to scan COSEM objects in meters for automatic discovery and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications about available firmware updates, event log, system log, kernel log, Internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer
Email: Receive emails with status alerts for various services
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, brute force protection
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Enables monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Has Direct Method support that allows RutOS API calls to be made via IoT Hub. Also has Plug and Play integration with Device Provisioning Service for zero-touch provisioning of devices to IoT Hub
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: can call the device API via AWS Jobs functionality

CPU: MediaTek, Dual-core, 880 MHz, MIPS1004Kc
RAM: 256MB, DDR3
FLASH storage: 16 MB serial NOR flash, 256 MB serial NAND flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Firmware Over The Air
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (Linux OS based on OpenWrt)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment included
GPL Customization: You can create your own customized and branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol
Server software: Supported by server software TAVL, RMS
Geofencing: Configurable multiple geofence zones

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external hard drive, flash drive, additional modem, printer, USB serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital input, 0–6 V detected as logic low, 8–50 V detected as logic high
Output: 1 x digital output, open collector output, max 50 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Allows you to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage: 9 – 50 V DC, reverse polarity protection, overvoltage protection >51 V DC for max. 10 µs
PoE (passive): Ability to supply power via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 V DC
Power Consumption: Sleep: < 3.9 W, Max: < 12.3 W

Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 4 x WAN type LED, 2 x mobile connection type, 5 x mobile connection strength, 8 x LAN status, 1 x power, 2 x 2.4G and 5G Wi-Fi
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power: 1 x 4-pin power connector
Antenna: 2 x SMA for cellular, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Restart/Custom Reset/Factory Reset button
Other: 1 x ground screw

Housing material: Anodized aluminum housing and panels
Dimensions (W x H x D): 115 x 44.2 x 95.1 mm
Weight: 460g
Mounting options: DIN rail, wall mount, flat surface (all require accessories)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

Regulatory: WEE

Standards: EN 55032:2015 + A11:2021
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019 + A2:2021
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-17 V3.2.4
EN 301 489-19 V2.2.1
EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiated immunity: EN IEC 61000-4-3:2020
EFT (Electromagnetic Fast Transients): EN 61000-4-4:2012
Surge immunity (AC mains connection): EN 61000-4-5:2014 + A1:2017
CS (conducted interference): EN 61000-4-6:2014
DIP (voltage dips and interruptions): EN 61000-4-11:2020

Standards: EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.2.1
EN 300 328 V2.2.2
EN 301 893 V2.1.1
EN 300 440 V2.2.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

Standarder: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti