Teltonika RUT976

Cellular module: 5G Sub-6Ghz SA: 223 Mbps download, 123 Mbps upload, 4G LTE Cat 4 – LTE: 195 Mbps download, 105 Mbps upload
3GPP version: Release 17 RedCap
SIM switching: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection failed, SIM idle
Status: IMSI, ICCID, operator, operator state, data connection status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator Block/Allow List (by country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network connections and services
Tape management: Tape locking, display of status of used tapes
SIM Sleep Protection: Allows you to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked
SIM PIN management: Allows you to set, change, or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile operator and device in LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, auto-cipher setup, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: Hidden SSID mode and access control based on MAC address
Wi-Fi users: Up to 100 simultaneous connections
Wireless connectivity features: Wireless mesh network (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio source metering (802.11k)
Wireless network MAC filter: Allow list, block list
Wireless QR Code Generator: When scanned, the user automatically connects to the network without having to enter login information
TravelMate: Forwards the Wi-Fi hotspot home page to the next connected device

WAN: 1 x WAN port 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN: 3 x LAN ports, 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on LAN (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-ALG protocol NAT helper functions, which enable correct routing of VoIP packets
Connection monitoring: Ping Reboot, Wget Reboot, periodic reboot, LCP and ICMP for link auditing
Firewall: Port forwarding, traffic rules, custom rules
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, enable/disable auto-configuration, change transmission speed, and more
Network topology: Visual representation of the network, showing which devices are connected to each other
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC address with wildcards
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network backup: Wi-Fi WAN, cellular, VRRP, wired connections – all can be used as automatic failover
Load Balancing: Balance internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, restrictions for individual users or groups, user management, 9 predefined customizable themes and the ability to upload and download your own hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol
Port mirroring: Mirrored network traffic on Ethernet ports for monitoring and analysis

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDOS protection (SYN flood protection, SSH attack security, HTTP/HTTPS attack security), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scans)
VLAN: Port and tag-based VLAN separation
Mobile data control: Data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to only allow specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Certificate Generation Methods via Let's Encrypt and SCEP
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without having to change the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support

Supported modes: Router
Supported connection types: RS485, TCP
Configuration options: Support for multiple BACnet/IP interfaces, network number assignment, pre-configured BDT entries for BBMD (BACnet Broadcast Management Device)

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: RTU (RS232, RS485), TCP, USB
Custom registers: MODBUS TCP custom registers block requests, which read/write to a file in the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them collectively to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: TCP Master, DNP3 Outstation
Supported connection types: RS232, RS485, TCP, USB

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: RS232, RS485, TCP
COSEM: Ability to scan the meter's COSEM object for automatic discovery and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/end with timer, Wi-Fi on/off
Email: Receive emails with status notifications from various services
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity - Cloud of Things: Enables monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows to make RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables zero configuration registration of devices to IoT Hubs.
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 32 MB, NOR Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol
Server software: Supported server software TAVL, RMS
Geofence: Configurable multiple geofence zones

RS232: DB9 connector, RS232 (with RTS, CTS flow control)
RS485: RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
Serial functions: Console, Serial over IP, Modem, MODBUS gateway, NTRIP client

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external HDD, flash drive, printer, USB-serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output: 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x digital open collector output (30 V, 300 mA, on 4-pin power connector)
Events: Email, RMS, SMS
I/O Juggler: Allows you to set certain I/O conditions to initiate an event

Physical size: Micro SD (internal)
Applications: Samba share, storage expansion, DLNA
Capacity: Up to 2TB
Storage formats: FAT32, NTFS, ext2, ext3, ext4

Rest: < 3 W, Max: < 7 W

Ethernet: 4 x RJ45 ports, 10/100 Mbps
Inputs/outputs: 2 x inputs and 2 x outputs on 10-pin industrial connector, 1 x digital input and 1 x digital output on 4-pin power connector
Status LED: 1 x two-color connection status, 5 x cellular connection strength, 4 x Ethernet status, 1 x power
SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8V/3V, external SIM holders, eSIM (optional - requires different hardware; contact your sales representative)
Power: 1 x 4-pin power connector
Input/output: 1 x 10-pin industrial connector for inputs/outputs
Antenna: 2 x SMA for cellular, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
RS232: 1 x DB9 connector
RS485: 1 x 6-pin industrial connector
Reset: Button for restart, reset to user defaults and factory reset

Housing material: Aluminum housing, plastic panels
Dimensions (W x H x D): 110 x 50 x 100 mm
Weight: 295g
Mounting options: DIN rail, wall mount, flat surface (all require add-on kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

WEEE

2 års fabriksgaranti