Teltonika RUT906

Cellular module: The cellular module supports 4G LTE Cat 4 with up to 150 Mbps download and 50 Mbps upload, 3G with up to 21 Mbps download and 5.76 Mbps upload, and 2G with up to 236.8 kbps in both download and upload. It is based on 3GPP Release 9.
SIM switch: The device supports two SIM cards with automatic switching in case of weak signal, data limit reached, SMS limit, roaming, no network access, access denied, failed data traffic or to protect against SIM inactivity.
Status: Status information includes IMSI, ICCID, operator, operator status, data traffic status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC.
SMS: SMS features include SMS status, configuration, email to SMS, SMS to email, SMS to HTTP, SMS forwarding, scheduled SMS, auto-replies, and support for the SMPP protocol.
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages.
Blocking/Allowing: Operators can be blocked or allowed based on country or specific operators.
Tape management: Support for tape locking and display of currently used tape.
SIM idle protection: SIM inactivity protection enables periodic switching to the second SIM card to establish data traffic and avoid blocking the card.
SIM PIN Management: Ability to set, change or disable the SIM card PIN code.
APN: Support for automatic APN configuration.
Bridge: Direct connection (bridge) between the mobile operator and a device in the LAN network.
Passthrough: Ability to let the router assign its mobile WAN IP to another device on the local network.

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: ESSID stealth mode
Wi-Fi users: Up to 100 simultaneous connections
Wireless connectivity features: Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio asset metering (802.11k)
Wireless MAC filter: Allow list, block list
Wireless QR code generator: When scanned, the user is automatically connected to the network without having to enter login details
TravelMate: Forward the Wi-Fi hotspot landing page to a subsequent connected device

WAN: 1 x WAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN: 3 x LAN ports, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-ALG protocol NAT handling, enabling proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Auditing
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall status view: View all firewall statistics, rules, and counters
Port Management: View device ports, enable and disable each port, enable/disable auto-configuration, change transmission speed, etc.
Network topology: Visual representation of the network that shows which devices are connected to each other
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual or group-based restrictions, user management, 9 predefined customizable themes and the ability to upload and download your own hotspot themes
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, cellular, VRRP, wired options – all can be used as automatic failover
Load Balancing: Balance internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic Management: Real-time monitoring, wireless signal graphs, traffic usage history
Port Mirroring: Mirror network traffic on Ethernet ports for monitoring and analysis

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDOS protection (SYN flood protection, SSH attack security, HTTP/HTTPS attack security), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan)
VLAN: Port and tag-based VLAN separation
Mobile data control: Mobile data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to only allow specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Let's Encrypt and SCEP Certificate Generation Methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changing the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting phase 2, phase 3 and dual hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.

Supported connection types: RS485, TCP
Supported modes: Router

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Station, Outstation
Supported connection types: RS232, RS485, TCP, USB

Supported modes: Server, Client
Supported connection types: RTU (RS232, RS485), TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality

Modbus MQTT Gateway:
Allows sending commands and receiving data from MODBUS server via MQTT broker

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: RS232, RS485, TCP
COSEM: Enables scanning of the meter's COSEM object for automatic discovery and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Round start, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Allows monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Allows monitoring of: device model, version and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to server to send all available parameters to the cloud. Supports Direct method which enables running RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which allows "zero-touch" device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Supports Jobs functionality: call the device API with AWS Jobs

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++, Python, Java in Package Manager
Development tools: SDK package with build environment provided
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS. (GLONASS, BeiDou, Galileo and QZSS – under development)
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
NTRIP: Networked Transport of RTCM via Internet Protocol (NTRIP) protocol
Server software: Supported server software TAVL, RMS
Geofencing: Configurable multiple geofence zones

RS232: DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud
RS485: RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300–230400 baud
Serial functions: Console, Serial over IP, Modem

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external hard drive, flash drive, additional modem, printer, USB serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

Input: 1 x digital dry contact (0-3 V), 1 x digital galvanically isolated input (0-30 V), 1 x analog input (0-24 V), 1 x digital non-isolated input (on 4-pin power connector, 0-5 V detected as logic low, 8-30 V detected as logic high)
Output: 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x digital open collector output (30 V, 300 mA, on 4-pin power connector)
Events: Email, RMS, SMS
I/O Juggler: Ability to set certain I/O conditions to initiate an event

SD CARD Physical size: Micro SD (internal)
Applications: Samba share, storage expansion, DLNA
Capacity: Up to 2TB
Storage formats: FAT32, NTFS, ext2, ext3, ext4

Connector: 4-pin industrial DC power connector
Input voltage: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10 µs max
PoE (passive): Passive PoE over free pairs. Ability to supply power via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption: < 2 W in sleep mode, < 7 W max

Ethernet: 4 x RJ45 ports, 10/100 Mbps
I/O: 2 x inputs and 2 x outputs on 10-pin industrial connector, 1 x digital input and 1 x digital output on 4-pin power connector
Status LED: 1 x two-color connection status, 5 x mobile signal strength, 4 x ETH status, 1 x power
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (optional - requires different hardware; contact your sales representative)
Power: 1 x 4-pin power connector
Input/output: 1 x 10-pin industrial connector for inputs/outputs
Antenna: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
RS232: 1 x DB9 connector
RS485: 1 x 6-pin industrial connector
Reset: Button for restart, reset to user default, factory reset

Housing material: Aluminum housing, plastic panels
Dimensions (W x H x D): 109.5 x 50 x 100 mm
Weight: 295g
Mounting options: DIN rail, wall mount, flat surface (all require accessory kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

Regulations: CE, UKCA, RCM, CB, E-marking

Standards: EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-19 V2.2.0, EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiated Immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
CS: EN 61000-4-6:2014
DIP: EN IEC 61000-4-11:2020
Standards: CE: EN 62311, CB: IEC 62368-1:2018

Standards: EN 301 908-1; EN 301 908-2; EN 301 908-13; EN 300 328;

2 års fabriksgaranti