Teltonika RUT361

Cellular module: 4G LTE Cat 6 up to 300 Mbps download / 50 Mbps upload; 3G up to 42 Mbps download / 5.76 Mbps upload
3GPP version: Release 12
Status: IMSI, ICCID, operator, operator status, data state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading messages via USSD (Unstructured Supplementary Service Data)
Block/Allow List: Operator Block/Allow List (by country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape locking, display of used tapes
SIM PIN Management: SIM PIN Management allows you to set, change or deactivate the SIM card PIN
APN: Automatic APN configuration
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n (Wi-Fi 4), 2x2 MIMO, Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic cipher modes, client splitting, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: ESSID stealth mode
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Wireless mesh networking (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio source metering (802.11k)
Wireless network MAC filter: Allow list, block list
Wireless Network QR Code Generator: Upon scanning, a user will automatically connect to the network without having to enter login credentials
TravelMate: Forwards the Wi-Fi hotspot welcome page to the next connected device

WAN: 1 x WAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u and 802.3az standards, supports auto MDI/MDIX
LAN: 1 x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u and 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN
VoIP Passthrough support: H.323 and SIP-ALG protocol NAT helper features that enable proper forwarding of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Monitoring
Firewall: Port forwarding, traffic rules, custom rules, TTL value customization
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on/off, change transmission speed, etc.
Network topology: Visual representation of the network that shows which devices are connected to each other
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static assignments: MAC address with wildcards
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: VRRP, wired options – all can be used as automatic failover, Wi-Fi WAN, Cellular network
Load Balancing: Balance internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual or group-based restrictions, user management, 9 pre-set customizable themes and the ability to upload and download your own hotspot themes
SSHFS: Ability to mount remote file systems via the SSH protocol
Traffic Management: Real-time monitoring, wireless signal graph, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack protection: DDoS protection (protection against SYN flood, SSH attacks, HTTP/HTTPS attacks), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scans)
VLAN: Port and tag-based VLAN separation
Mobile data quota control: Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to allow only specified pages
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP as certificate generation methods
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, support for GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3, L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changes to the application's source code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting that allows scripts to use the router's Data to Server feature

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connection: TCP

DLMS support: Standard protocol for exchanging data from electricity meters
Supported modes: Client
Supported connection types: TCP

Teltonika Networks Web API (beta) support: Extend the capabilities of your device by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, notifications about available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, brute force protection
JSON-RPC: Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Möjliggör övervakning av: WAN-typ, WAN IP, mobiloperatörens namn, signalstyrka, mobilnätverkstyp
Cumulocity – Cloud of Things: Möjliggör övervakning av: Enhetsmodell, version och serienummer, WAN-typ och IP, mobil cell-ID, ICCID, IMEI, anslutningstyp, operatör, signalstyrka. Stöd för omstart och firmwareuppdateringar
Azure IoT Hub: Kan konfigureras med Data till server för att skicka alla tillgängliga parametrar till molnet. Har stöd för Direct Method, vilket möjliggör körning av RutOS API-anrop från IoT Hub. Har även Plug and Play-integration med Device Provisioning Service som möjliggör automatisk enhetsregistrering i IoT Hubs
AWS IoT Core: Verktyg för att interagera med AWS molnplattform. Jobb-stöd: Utför API-anrop till enheten via AWS Jobs-funktionalitet

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB serial NOR flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration.
FOTA: Update firmware via wireless transfer.
RMS: Update firmware and configuration for multiple devices at once.
Keep settings: Update firmware without losing current configuration.
Restore Factory Settings: A full factory reset restores all system settings, including IP address, PIN, and user data to the manufacturer's original configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with development environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs.
Package Manager: Package Manager is a service used to install additional software on the device.

Input: Up to 2 configurable digital inputs (shared), 0–6 V detected as logic low, 8–30 V detected as logic high
Output: Up to 2 configurable digital outputs (shared), Open collector output, maximum output 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Allows you to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage: 9–30 V DC, reverse polarity protection, surge/transient protection
PoE (passive): Passive PoE (optional – requires other hardware; contact your sales representative)
Power Consumption: Sleep: < 2.4 W, Max: < 4.7 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
I/O: 2 x configurable I/O pins on 4-pin power connector
Status LEDs: 2 x mobile connection type, 3 x mobile connection strength, 2 x Ethernet status, 1 x power
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM holder
Power: 1 x 4-pin power connector
Antenna: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi
Reset: Restart/Custom Reset/Factory Reset button

Housing material: Aluminum housing
Dimensions (W x H x D): 100 x 30 x 85 mm
Weight: 243g
Mounting options: DIN rail, wall mount, flat surface (all require accessory kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory: CE, UKCA, FCC, IC, RCM, CB, WEEE, RoHS, REACH
Carrier: PTCRB, AT&T, Verizon

Standards: EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiated immunity: EN IEC 61000-4-3:2020
EFT (Electromagnetic Fast Transients): EN 61000-4-4:2012
Voltage spike immunity (AC mains power port): EN 61000-4-5:2014 + A1:2017
CS (conducted interference immunity): EN 61000-4-6:2014
DIP (voltage dips and short interruptions): EN IEC 61000-4-11:2020

Standards: EN 300 328 V2.2.2, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.2.1

Standards: CE: EN 62368-1:2014 + A11:2017, EN IEC 62232:2017, EN 50385:2017, RCM: AS/NZS 62368.1:2018, CB: IEC 62368-1:2018

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti