Teltonika RUT271

Cellular module: 5G Sub-6GHz SA 223 Mbps download, 123 Mbps upload; 4G LTE Cat 4 – LTE 195 Mbps download, 105 Mbps upload
3GPP version: Release 17 RedCap
Status: IMSI, ICCID, operator, operator status, data service status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, email to SMS, SMS to email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoresponder, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator Block/Allow List (by country or specific operators)
Multiple PDNs: Ability to use different PDNs for multiple network connections and services
Tape management: Tape lock, display of currently used tape
SIM PIN Management: SIM PIN Management allows you to set, change or deactivate the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile operator and device in LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic cipher modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: SSID stealth mode and access control based on MAC address
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Wireless mesh networking (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource metering (802.11k)
Wireless MAC Filter: Allow List, Block List
Wireless QR code generator: When scanned, the user automatically connects to the network without having to enter login credentials
TravelMate: Forwards the Wi-Fi hotspot welcome page to the next connected device

WAN: 1 x WAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 1 x LAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on LAN (WOL), VXLAN
VoIP forwarding support: H.323 and SIP-ALG protocol NAT aids that enable proper forwarding of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Monitoring
Firewall: Port forwarding, traffic rules, custom rules
Firewall Status Page: View all your firewall statistics, rules, and rule counters
Port Management: View device ports, enable or disable each port, turn on/off auto-configuration, change transmission speed, etc.
Network topology: Visual representation of your network, showing which devices are connected to each other
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static assignments: wildcard MAC addresses
QoS / Smart Queue Management (SQM): Traffic prioritization by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, cellular, VRRP, wired options – all can be used as automatic failover
Load Balancing: Balance internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authentication, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, restrictions for individual users or groups, user management, 9 predefined customizable themes and the ability to upload/download custom hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be activated via the web interface (WebUI), unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack protection: DDoS protection (protection against SYN flood, SSH attacks, HTTP/HTTPS attacks), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scans)
VLAN: Port and tag-based VLAN separation
Mobile data quota control: Mobile data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to allow only specified websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Support for certificate generation via Let's Encrypt and SCEP
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, support for GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changing the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting phase 2, phase 3 and dual hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Support for both client and server

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; custom LUA scripting allows scripts to use the router's data to server functionality

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connection: TCP

DLMS support: DLMS – standard protocol for data exchange from electricity meters
Supported modes: Client
Supported connection types: TCP
COSEM: Ability to scan the meter's COSEM object for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event logs, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
Email: Receive email notifications about status alerts for various services
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Enables monitoring of: device model, version and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows RutOS API calls to be executed on IoT Hub. Also has Plug and Play integration with Device Provisioning Service for zero-touch device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API with AWS Jobs functionality

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 32 MB, NOR Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Firmware update
RMS: Firmware and configuration update for multiple devices at the same time
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

Input: 1 x digital input, 0–6 V detected as logic low, 8–30 V detected as logic high
Output: 1 x digital output, open collector, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Ability to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage: 9 – 30 V DC, reverse polarity protection; overvoltage protection >31 V DC for max. 10 µs
PoE (passive): Passive PoE over spare pair. Ability to power via LAN1 port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 V DC
Power consumption: Sleep: < 1.5 W, Max: < 3 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
I/O: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 3 x connection type status LEDs, 5 x connection strength status LEDs, 2 x LAN status LEDs, 1 x power LED
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM card holder
Power: 1 x 4-pin power connector
Antenna: 2 x SMA for cellular, 1 x RP-SMA for Wi-Fi
Reset: Restart/User Defaults/Factory Reset button

Housing material: Aluminum housing, plastic panels
Dimensions (W x H x D): 83 x 25 x 74 mm
Weight: 130g
Mounting options: DIN rail, wall mount, flat surface (all require add-on kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

CE, FCC, ISED, CB, WEEE

2 års fabriksgaranti