Teltonika RUT241

Cellular module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
3GPP Release: Release 10/11 depending on hardware version
eSIM:* Consumer-grade eSIM, profile download and delete operations, up to 7 eSIM profiles; does not include data plans
*Feature access varies depending on order code
SIM switch:* 1 x 2FF SIM and 1 x eSIM, auto-switch in case: weak signal, data limit, SMS limit, roaming, no network, network rejection, data connection failed
*Feature access varies depending on order code
Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or separate operators)
Multiple PDNs: Ability to use different PDNs for multiple network access and services
Tape management: Tape locking function, display of used tape status
SIM PIN Management: Manage SIM PIN allows you to set, change or disable the SIM card PIN
APN: Auto APN
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto encryption modes, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: SSID stealth mode and access control based on MAC address
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource management (802.11k)
Wireless MAC filter: Allowlist, blocklist
Wireless QR Code Generator: When scanned, a user will automatically connect to your network without having to enter login information
TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device

WAN: 1 x WAN port 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN: 1 x LAN port, 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper, which enables correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all your firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable each one, turn auto-configuration on or off, change their transmission speed, and so on
Network topology: Visual representation of your network showing which devices are connected to other devices
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authentication, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 preset customizable themes and ability to upload and download custom hotspot themes
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM): Traffic prioritization via queues based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supported >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network Backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each can be used as automatic failover
Load Balancing: Balancing Internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic management: Real-time monitoring, wireless signal graphs, traffic history

Authentication: Distributed key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS prevention (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, Whitelist to specify only allowed websites
Access Control: Flexible access control for SSH, Web UI, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes to the application's code
DMVPN: Method for building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, which allows scripts to use the router's Data to Server feature.

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connection: TCP

DLMS Support: DLMS - standard protocol for data exchange of energy meter information
Supported modes: Client
Supported connection types:TCP
COSEM: Enables scanning of COSEM objects from meters for automatic detection and configuration

Teltonika Networks Web API (beta) support: Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Call: Reload, Status, Mobile data on/off, Output port on/off, answer/hang up with a timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity - Cloud of Things: Enables monitoring of: Device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade actions
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Has direct method support that allows RutOS API calls to be made on IoT Hub. Also has Plug and Play integration with Device Provisioning Service that enables zero-touch device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Preserve settings: Update firmware without losing current configuration
Factory Reset: A full factory reset restores all system settings, including IP address, PIN, and user data, to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
GPL Customization: You can create your own custom, branded firmware and website application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device.

Input: 1 x Digital input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output: 1 x Digital output, Open collector output, max output 30 V, 300 mA
Events: Email, RMS, SMS
I/O Juggler: Allows you to set certain I/O conditions to initiate events.

Connection: 4-pin industrial DC power socket
Input voltage range: 9 – 30 VDC, reverse polarity protection; overvoltage protection >31 VDC 10us max
PoE (passive): Passive PoE over free pairs. Ability to supply power via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption: < 6.5W Max

Ethernet: 2 x RJ45 ports, 10/100 Mbps
I/O: 1 x Digital input, 1 x Digital output on 4-pin power connector
Status LEDs: 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power: 1 x 4-pin power connector
Antenna: 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connections
Reset: Reload/Reset to user-defined settings/Factory reset button

Enclosure material: Aluminum housing, plastic panels
Dimensions (W x H x D): 83 x 25 x 74 mm
Weight: 125g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress protection class: IP30

Regulatory: CE, UKCA, ANRT, Kenya, ICASA, FCC, IC, PTCRB, NOM, RCM, KC, Giteki, IMDA, E-mark, CB, UL/CSA Safety, RoHS, REACH, R118
Carrier: AT&T, Verizon, T-Mobile, Uscellular

Standards: EN 55032:2015 + A11:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Final Draft EN 301 489-52 V1.2.0
ESD: EN 61000-4-2:2009
Radiated Immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (AC Mains Power Port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2020

Standards: EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1
, EN 301 908-13 V13.2.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1, Ed. 3 dated December 13, 2020, CAN/CSA C22.2 No. 62368-1:19

2 års fabriksgaranti