Teltonika RUT206

Cellular module: 4G LTE: Category 4 up to 150 Mbps download / 50 Mbps upload;
3G up to 21 Mbps download / 5.76 Mbps upload;
2G up to 236.8 kbps download / 236.8 kbps upload
3GPP version: Release 9
SIM switching: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network rejection, data connection failure, SIM sleep protection
Status: IMSI, ICCID, operator, operator status, data connection status, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow list: Operator block/allow list (by country or individual operators)
Tape management: Tape locking, display of used tapes
SIM Sleep Protection: Provides the ability to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked
SIM PIN management: Allows you to set, change, or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile operator and device in the LAN network
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN network

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic encryption modes, client isolation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: SSID stealth mode and access control based on MAC address
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource metering (802.11k)
Wireless MAC filter: Allow list, block list
QR code generator for Wi-Fi: When scanned, the user will automatically connect to the network without having to enter login information
TravelMate: Forwards the Wi-Fi hotspot welcome page to subsequent connected devices

WAN: 1 x WAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 1 x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on Lan (WOL), VXLAN
VoIP passthrough support: The NAT helper functions of the H.323 and SIP-ALG protocols enable proper routing of VoIP packets
Connection monitoring: Ping restart, Wget restart, periodic restart, LCP and ICMP for link monitoring
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable or disable each one, turn auto-configuration on or off, change transfer speed, etc.
Network topology: Visual representation of the network that shows which devices are connected to which others
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static assignments: MAC with wildcards
QoS / Smart Queue Management (SQM): Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS-over-HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, cellular, VRRP, wired options – all can be used as automatic failover
Load Balancing: Balance internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 predefined customizable themes and the ability to upload and download your own hotspot themes
Hotspot 2.0: Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
SSHFS: Ability to mount a remote file system via the SSH protocol
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be activated via the web interface (WebUI), unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDoS protection (SYN flood protection, SSH attack security, HTTP/HTTPS attack protection), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile data quota control: Mobile data limit, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to allow only specified websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Support for certificate generation via Let's Encrypt and SCEP
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, support for GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changing the application's source code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Support for both client and server

Supported modes: Router
Supported connection types: RS485, TCP

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: RTU, TCP
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extracts parameters from multiple sources and different protocols, and sends them to a single server; custom LUA scripting allows scripts to use the router's Data to Server feature

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: TCP Master, DNP3 Outstation
Supported connection types: RS232, RS485, TCP

DLMS support: DLMS – standard protocol for data exchange from meters in the energy industry
Supported modes: Client
Supported connection types: TCP
COSEM: Ability to scan the meter's COSEM object for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type
Cumulocity - Cloud of Things: Enables monitoring of: device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Features reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows to run RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables zero-touch device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Supports jobs: can call the device API using AWS Jobs functionality

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 32 MB, NOR Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Firmware update
RMS: Firmware/configuration update for multiple devices at the same time
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: Package Manager is a service used to install additional software on the device

RS232: RS232 interface without flow control signals
RS485: Half-duplex (2-wire) RS485 interface

Events: Email, RMS, SMS

Physical size: Micro SD (internal)
Applications: Samba sharing
Capacity: Up to 2TB
Storage formats: FAT32, NTFS, ext2, ext3, ext4

PoE ports: 1 x PoE In
PoE standards: Active PoE input 802.3af Class 0 (12.94 W) on LAN port

Connector: 2-pin industrial DC power connector
Input voltage range: 9 - 57 VDC, reverse polarity protection, overvoltage protection >58V @10us min
PoE (passive): Passive PoE over spare pair 4.5 (+) / 7.8 (-). Possibility to supply power via LAN port, passive PoE voltage: 16 - 57 VDC
Power consumption: Sleep: < 2 W, Max: < 3.5 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
Status LEDs: 3 x connection type status LEDs, 3 x connection strength status LEDs, 2 x LAN status LEDs, 1 x power LED
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, dual-layer SIM card tray
Power: 1 x 2-pin power connector
Antenna: 2 x SMA for cellular, 1 x RP-SMA for Wi-Fi
RS232, RS485: 1 x 6-pin terminal block
Reset: Button for restarting/resetting to user default/factory settings

Housing material: Anodized aluminum housing and panels
Dimensions (W x H x D): 83 x 25 x 83 mm
Weight: 132g
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulations: CE, UKCA, CB, RCM, EAC, UCRF

2 års fabriksgaranti