Teltonika RUT200 - Industrial mobile router

Cellular module: 4G LTE Cat 4 up to 150 Mbps download / 50 Mbps upload; 3G up to 21 Mbps download / 5.76 Mbps upload; 2G up to 236.8 kbps download / 236.8 kbps upload
3GPP Release: Release 9
Status: IMSI, ICCID, operator, operator state, data state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, sent/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, E-MAIL to SMS, SMS to E-MAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Support for sending and reading USSD (Unstructured Supplementary Service Data) messages
Block/Allow List: Operator block/allow list (by country or individual operators)
Multiple PDNs: Ability to use different PDNs for multiple network connections and services
Tape management: Tape locking, display of active tape status
SIM PIN management: Manage SIM code: set, change or disable the SIM card PIN code
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile operator and device on LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic encryption selection, client separation, EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: Hidden SSID mode and access control based on MAC address
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource metering (802.11k)
Wi-Fi MAC Filter: Allow List, Block List
QR code generator for Wi-Fi: When scanned, the user is automatically connected to the network without having to enter login details
TravelMate: Forwards the Wi-Fi hotspot login page to a subsequent connected device

WAN: 1 x WAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN: 1 x LAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Routing: Static routes, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-ALG NAT helper functions for proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Monitoring
Firewall: Port forwarding, traffic rules, custom rules, TTL customization
Firewall Status View: View all firewall statistics, rules, and counters
Port Management: View device ports, enable/disable ports, turn on/off auto-configuration, change transmission speed, etc.
Network topology: Visual representation of the network, showing which devices are connected to each other.
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcard
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: Secure DNS resolution via HTTPS proxy
Network backup: Wi-Fi WAN, Mobile, VRRP, Wired – all can be used as automatic failover
Load Balancing: Balances internet traffic across multiple WAN connections
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic management: Real-time monitoring, wireless signal graphs, data traffic history
Hotspot: Captive portal, internal/external Radius server, Radius MAC authentication, SMS authentication, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual or group-based restrictions, user management, 9 predefined and customizable themes with the ability to upload/download your own hotspot themes

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS authentication, IP and login attempt blocking, time-based login lockout, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDOS protection (SYN flood protection, protection against SSH and HTTP/HTTPS attacks), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan)
VLAN: Port and tag-based VLAN separation
Mobile data control: Mobile data quota, customizable period, start time, warning limit, phone number
Web filter: Blacklist to block unwanted websites, whitelist to allow only specific pages
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Support for certificate generation via Let's Encrypt and SCEP
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, support for 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: Support for XFRM, IKEv1, and IKEv2, with 14 encryption methods for IPsec:
3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16
GRE: Support for GRE tunnel and GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without code changes
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Support for Tinc client and server; offers encryption, authentication, and compression in the tunnels

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom Registers: MODBUS TCP custom register block requests that read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis
Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting that allows scripts to use the router's Data to Server feature.

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via an MQTT broker.

Supported modes: Station, Outstation
Supported connection: TCP

DLMS Support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP
COSEM: Enables scanning of COSEM objects in meters for automatic discovery and configuration

Teltonika Networks Web API (beta) support. Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications about available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call: Restart, status, mobile data on/off, output on/off, answer/hang up with timer, Wi-Fi on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Allows monitoring of: WAN type, WAN IP, mobile operator name, mobile signal strength, mobile network type.
Cumulocity - Cloud of Things: Allows monitoring of: Device model, revision and serial number, WAN type and IP, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade capabilities.
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct Method which enables running RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables zero-configuration provisioning of devices to IoT Hubs.
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality.

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB, SPI Flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration.
FOTA: Update firmware.
RMS: Update firmware/configuration for multiple devices at once.
Keep settings: Update firmware without losing current configuration.
Restore Factory Settings: A full factory reset restores all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment included
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs.
Package Manager: The package manager is a service used to install additional software on the device.

Input: 1 x digital input, 0–6 V detected as logic low, 8–30 V detected as logic high.
Output: 1 x digital output, open collector output, max 30 V, 300 mA.
Events: Email, RMS, SMS.
I/O juggler: Allows you to set up certain I/O conditions to initiate an event.

Connector: 4-pin industrial DC power connector.
Input voltage range: 9 – 30 V DC, reverse polarity protection; overvoltage protection >31 V DC for max. 10 µs.
PoE (passive): Passive PoE via free pairs. Ability to power the device via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 V DC.
Power consumption: < 6.5 W Max.

Ethernet: 2 x RJ45 ports, 10/100 Mbps.
I/O: 1 x digital input, 1 x digital output on 4-pin power connector.
Status LEDs: 3 x connection type status LEDs, 5 x connection strength status LEDs, 2 x LAN status LEDs, 1 x power LED.
SIM: 1 x SIM card slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM holder.
Power: 1 x 4-pin power connector.
Antennas: 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antennas.
Reset: Button for restart/user default reset/factory reset.

Housing material: Aluminum housing, plastic panels.
Dimensions (W x H x D): 83 x 25 x 74 mm.
Weight: 125 g.
Mounting options: DIN rail, wall mount, flat surface (all require additional kit).

Operating temperature: -40°C to 75°C.
Operating humidity: 10% to 90%, non-condensing.
Protection class: IP30.

Regulations: CE, UKCA, RCM, EAC, Anatel, ANRT, Kenya, ICASA, NCC, ETA-WPC, SIRIM, IMDA, NTC, NBTC, MTC NOM, E-mark, CB, RoHS, REACH, R118.

Standards: EN 55032:2015 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013 + A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiated immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (AC mains): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2020

Standards: EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V15.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti