Teltonika RUT142

Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto encryption modes, client security (client separation), EAP-TLS with PKCS#12 certificate, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID: ESSID stealth mode
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Wireless mesh networking (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio access metering (802.11k)
Wireless network MAC filter: Allow list, block list
QR code generator for Wi-Fi: When scanned, the user automatically connects to your network without having to enter login details
TravelMate: Forward the Wi-Fi hotspot landing page to subsequent connected devices

WAN: 1 x WAN port 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX cross-connect
LAN: 1 x LAN port 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX cross-connect

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP Passthrough Support: NAT helper functions for H.323 and SIP-alg protocols that enable proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Auditing
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all your firewall statistics, rules, and rule counters
Port Management: View device ports, enable or disable them, turn on/off auto-configuration, change transmission speed, etc.
Network topology: Visual representation of your network showing which devices are connected to each other
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static assignments: MAC with wildcards
QoS / Smart Queue Management (SQM): Prioritization of traffic based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, VRRP, wired options – all can be used as automatic failover
Load Balancing: Balance internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 pre-set customizable themes and the ability to upload and download custom hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack security: DDoS protection (SYN flood protection, SSH attack security, HTTP/HTTPS attack security), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Web filter: Blacklist to block unwanted websites, whitelist to only allow specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Certificate Generation Methods via Let's Encrypt and SCEP

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, support for GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously, L2TPv3, support for L2TP over IPsec
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without changing the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2, Phase 3 and Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Support for both client and server

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, RTU (RS232)
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send everything to a single server; Custom LUA scripting that allows scripts to use the router's data to server functionality

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connection: TCP, RTU (RS232)

DLMS support: DLMS – standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP, RTU (RS232)
COSEM: Ability to scan meter COSEM objects for automatic discovery and configuration

Teltonika Networks Web API support (beta). Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

Web Interface (WEB UI): HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
Email: Receive status notifications via email for various services
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

Cumulocity - Cloud of Things: Enables monitoring of: Device model, revision and serial number, WAN type and IP. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct method which allows RutOS API calls to be executed on IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables fully automated device provisioning to IoT Hub

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB serial NOR flash

Web interface (WEB UI): Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (Linux OS based on OpenWrt)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
GPL Customization: You can create your own customized and branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

Connector: 3-pole pluggable terminal block
Input voltage range: 9–30 VDC, reverse polarity protection, overvoltage protection >31 VDC, max 10 µs
PoE (Passive): Passive PoE via spare pair. Ability to supply power via LAN1 port. Not compatible with IEEE 802.3af, 802.3at and 802.3bt standards. Mode B, 9–30 VDC
Power consumption: Sleep: < 1 W / Max: < 2 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
Status LEDs: 1 x WAN type LED, 1 x LAN type LED, 1 x Power LED
Power: 1 x 3-pin power connector
Antennas: 1 x RP-SMA for Wi-Fi
RS232: 1 x DB9 socket
Reset: Restart / Reset to user default / Factory reset button
Other: 1 x Grounding screw

Housing material: Aluminum housing
Dimensions (W x H x D): 113.10 x 25 x 68.6 mm
Weight: 149.2g
Mounting options: Integrated DIN rail mount; wall mount and flat surface mount (additional mounting kit required)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

CE, UKCA, RCM, FCC, IC, CB, WEEE, RoHS, REACH

Standards: EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4
ESD: EN 61000-4-2:2009
Radiated immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (Ethernet ports): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014

Standards: EN 300 328 V2.2.2

Standards: CE: EN 62368-1:2014 + A11:2017, EN IEC 62232:2017, EN 50385:2017
RCM: AS/NZS 62368.1:2018
CB: IEC 62368-1:2018

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti