Teltonika OTD500

Cellular module: 5G Sub-6 GHz SA/NSA with speeds up to 3.4 Gbps download (4x4 MIMO) and 900/550 Mbps upload (2x2). Supports 4G LTE Cat 19 with 1.6 Gbps download and 200 Mbps upload. 3G up to 42 Mbps download and 5.76 Mbps upload.
3GPP Release: Release 16
eSIM: Consumer type eSIM with the ability to download and delete profiles, up to 7 profiles. Data subscription not included.
SIM switching: 2 SIM cards with automatic switching in case of weak signal, data limit, SMS limit, roaming, network problems, or if SIM is inactive.
Status information: Shows IMSI, ICCID, operator, network state, connection type, bandwidth, signal strength and much more.
SMS features: SMS status, configuration, email to SMS, SMS to email, SMS to HTTP, scheduled SMS and autoreply.
USSD: Support for sending and reading USSD messages.
Block/Allow list: Block or allow operators by country or individual operators.
Band management: Frequency band locking and status display.
SIM idle protection: Automatic switching to unused SIM card to avoid blocking.
SIM PIN: Manage the SIM card PIN code (set, change, delete).
APN: Automatic APN configuration.
Bridge & Passthrough: Possibility of direct connection between mobile operator and LAN device, as well as IP address forwarding.

Ethernet: 2 x RJ45 ports, 10/100/1000 Mbps, support for WAN configuration.

1 port for PoE-in and 1 port for PoE-out, compatible with the 802.3af/at and Alternative B standards, max 15 W per port.

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-driven routing
Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper, enabling correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall status page: View all your firewall statistics, rules, and counters
Port Management: View device ports, enable and disable each one, turn auto-configuration on/off, change transfer speed, and more
Network topology: Visual representation of your network, showing which devices are connected to which other devices
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcard
QoS / Smart Queue Management (SQM): Traffic prioritization queues based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supports >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup: VRRP, wired options, all of which can be used as automatic failover
Load Balancing: Load balances internet traffic across multiple WAN connections
Hotspot:
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default themes that can be customized and the ability to upload and download custom hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol
VRF support: Initial support for virtual routing and forwarding (VRF)
Traffic Management: Real-time monitoring, wireless signal graphs, traffic usage history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter: Blacklist to block unwanted websites, whitelist to specify only allowed websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
TPM: Identification and Authentication Module, TPM 2.0 standard
SSL certificate generation: Let's Encrypt and SCEP certificate generation methods
802.1x: Port-based network access control server

Supported modes: Server, Client
Supported connection types: TCP
Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router and can be used to extend MODBUS TCP Client functionality
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send everything to a single server; Custom LUA scripting allows scripts to use the router's Data to Server feature

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS server via MQTT broker

Supported modes: Station, Outstation
Supported connection: TCP

DLMS support: DLMS - standard protocol for exchanging meter data
Supported modes: Client
Supported connection types: TCP
COSEM: Allows scanning of the meter's COSEM object for automatic detection and configuration

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client/Server instance can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS encryption to existing clients and servers without any changes to the application's code
DMVPN: Method for building scalable IPsec VPNs, supporting phase 2, phase 3 and dual hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support.
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open-source WireGuard protocol

Teltonika Networks Web API (beta) support: Extend the capabilities of the device with a set of configurable API endpoints to retrieve or modify data. For more information, please see this documentation: https://developers.teltonika-networks.com

Supported modes: Client, Server
Supported connection types: TCP

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, Internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
Email: Receive status notifications for various services via email
SMS: SMS status, SMS configuration
Calls: Restart, Status, Mobile data on/off, Output on/off, answer/hang up with timer
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC: Management API over HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity - Cloud of Things: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Has Direct Method support allowing to make RutOS API calls on IoT Hub. Also has Plug and Play integration with Device Provisioning Service enabling zero-touch device provisioning to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Call the device API using AWS Jobs functionality

CPU: MediaTek, Dual-core, 880 MHz, MIPS1004Kc
RAM: 256 MB, DDR3
FLASH-lagring: 16 MB seriell NOR flash, 256 MB seriell NAND flash

WEB UI: Update firmware from file, check firmware on server, configuration profiles, configuration backup
FOTA: Firmware update
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: Full factory reset restores all system settings, including IP address, PIN, and user data to the manufacturer's default configuration

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++, Python, Java in Package manager
Development tools: SDK package with build environment
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: Package Manager is a service used to install additional software on the device

Connector: RJ45 connector
Input voltage: 42.5–57.0 VDC, reverse polarity protection, surge/transient protection
PoE input voltage: 42.5–57.0 VDC, reverse polarity protection, surge/transient protection
Power consumption: Idle: < 2.5 W / Max: < 9 W / PoE Max < 24 W

Ethernet: 2 x RJ45 ports, 10/100/1000 Mbps
Status LEDs: 3 x Mobile connection type, 3 x Mobile signal strength, 4 x ETH status LEDs
SIM: 2 x SIM card slots (Mini SIM – 2FF), 1.8 V/3 V
Power: RJ45, PoE In, 42.5 – 57.0 VDC
Antennas: 4 x internal antennas
Antenna specifications: 4 x 617 - 960 / 1695 - 2690 / 3300 - 4200 / 4200 - 5000MHz, 50 Ω, VSWR <3.5, gain <4.9 dBi, omnidirectional
Reset: Restart/User Defaults/Factory Reset Button

Housing: Plastic (PC+ASA)
Dimensions (W x H x D): 110 x 49.30 x 235 mm
Weight: 385g
Mounting options: Mounting bracket (for vertical flat surface or pole mounting)

Operating temperature: -40°C to 55°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP55

Regulatory: CE, UKCA, RCM, CB, EAC, UCRF, WEEE

Standards: EN 55032:2015 + A11:2020 + A1:2020; EN 55035:2017 + A11:2020; EN IEC 61000-3-2: 2019 + A1:2021; EN 61000-3-3: 2013 + A1:2019 + A2:2021; EN 301 489-1 V2.2.3; EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiation immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge immunity (AC mains power port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2020

Standards: EN 301 908-1 V13.1.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.1.1
EN 301 908-25 V15.1.1_15.0.6

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN 62311:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti