Teltonika DAP142

Wireless mode: IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP
WiFi Security: WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
SSID/ESSID: ESSID in stealth mode
Wi-Fi users: Up to 50 simultaneous connections
Wireless connectivity features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource metering (802.11k)
Wireless MAC filter: Allow list, block list
Wireless QR code generator: When scanned, the user automatically enters your network without having to enter login credentials
TravelMate: Forward Wi-Fi hotspot landing page to subsequent connected device

LAN: 2 x LAN ports, 10/100 Mbps, compatible with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-driven routing
Network protocols: TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support: H.323 and SIP-alg protocol NAT helper that enables correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwarding, traffic rules, custom rules
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on or off, change transmission speed, and more
Network topology: Visual representation of your network showing which devices are connected to which other devices
DHCP: Static and dynamic IP assignment, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcard
QoS / Smart Queue Management (SQM): Traffic prioritization based on source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supports >25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, VRRP, wired options, all of which can be used for automatic failover
Load Balancing: Balances internet traffic across multiple WAN connections
Hotspot 2.0: Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
SSHFS: Ability to mount remote file systems via SSH protocol
VRF support: Initial support for virtual routing and forwarding (VRF)
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Distributed key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flag, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
WEB filter: Blacklist to block unwanted websites, whitelist to allow only specified websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL Certificate Generation: Let's Encrypt and SCEP Certificate Generation Methods

OpenVPN: Flera klienter och en server kan köras samtidigt, 27 krypteringsmetoder
OpenVPN-kryptering: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2, med 14 krypteringsmetoder för IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE-tunnel, GRE-tunnel över IPsec-stöd
PPTP, L2TP: Klient/Server-instans kan köras samtidigt, L2TPv3, L2TP över IPsec-stöd
Stunnel: Proxy designad för att lägga till TLS-kryptering till befintliga klienter och servrar utan ändringar i programmets kod
DMVPN: Metod för att bygga skalbara IPsec VPN, stöd för fas 2, fas 3 och dubbla hubbar
SSTP: Stöd för SSTP-klientinstans
ZeroTier: Stöd för ZeroTier VPN-klient
WireGuard: Stöd för WireGuard VPN-klient och server
Tinc: Tinc erbjuder kryptering, autentisering och komprimering i sina tunnlar. Stöd för klient och server.
Tailscale: Tailscale erbjuder snabbhet, stabilitet och enkelhet jämfört med traditionella VPN. Krypterade punkt-till-punkt-anslutningar med hjälp av open source-protokollet WireGuard

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, RTU (RS232)
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router, and can be used to extend MODBUS TCP Client functionality.
Supported data formats: 8-bit: INT, UINT, 16-bit: INT, UINT (MSB- or LSB-first), 32-bit: Float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Other: HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to server function: Extract parameters from multiple sources and protocols and send them to a single server
Customizable LUA scripts: custom scripts can utilize the router's built-in "Data to server" function for advanced data processing and transfer

Modbus MQTT Gateway: Enables sending commands to and receiving data from a MODBUS server via an MQTT broker.

Supported modes: Station, Outstation
Supported connection types: TCP, RTU (RS232)

DLMS support: DLMS, standard protocol for data exchange with electricity meters
Supported modes: Client
Supported connection types: TCP, RTU (RS232)
COSEM: Ability to scan COSEM objects in meters for automatic detection and configuration

Teltonika Networks Web API (beta) support: Extend your device's capabilities by using a set of configurable API endpoints to retrieve or modify data. For more information, see this documentation: https://developers.teltonika-networks.com

Web interface (WEB UI): HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
Email: Receive emails with status alerts for various services
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT Publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against bruteforce attacks
JSON-RPC: Manage APIs via HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Tools for interacting with the ThingWorx cloud platform
Cumulocity – Cloud of Things: Enables monitoring of: device model, version and serial number, WAN type and IP address. Has actions for reboot and firmware upgrade
Azure IoT Hub: Can be configured with Data to Server to send all available parameters to the cloud. Supports Direct Method which enables execution of RutOS API calls via IoT Hub. Also has Plug and Play integration with Device Provisioning Service which enables automatic provisioning of devices to IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform. Jobs support: Run device APIs via AWS Jobs functionality

CPU: Mediatek, 580 MHz, MIPS 24KEc
RAM: 128MB, DDR2
FLASH storage: 16 MB serial NOR flash

Web interface (WEB UI): Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Update firmware
RMS: Update firmware/configuration for multiple devices at once
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset will restore all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell (ash), Lua 5.1, C, C++
Development tools: SDK package with build environment available
GPL Customization: You can create your own custom, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

RS232: Terminal block connector: TX, RX, RTS, CTS
Serial functions: Console, Serial over IP, Modem, MODBUS gateway, NTRIP client

Connector: 3-pin plug-in terminal block
Input voltage range: 9–30 VDC, reverse polarity protection, overvoltage protection >31 VDC for max. 10 µs
PoE (passive): Passive PoE over free pairs. Ability to power via LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9–30 VDC
Power consumption: Sleep: < 1 W / Max: < 2 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
Status LEDs: 2 x LAN type LED, 1 x Power LED
Power: 1 x 3-pin power connector
Antennas: 1 x RP-SMA for Wi-Fi
RS232: 1 x DB9 connector
Reset: Restart/Reset to User Defaults/Factory Reset buttons
Other: 1 x grounding screw

Housing material: Aluminum housing
Dimensions (W x H x D): 113.10 x 25 x 68.6 mm
Weight: 149.2g
Mounting options: Integrated DIN rail mount; wall mount and flat surface (additional kit required)

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Protection class: IP30

Regulatory: CE, UKCA, CB, FCC/IC

Standards (Wi-Fi 2.4 GHz, 5 GHz): 47 CFR Part 15 Subpart C - § 15.247

2 års fabriksgaranti