Teltonika DAP140

Wireless mode: IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi-AP
WiFi Security: WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
SSID/ESSID: Stealth mode for SSID and access control based on MAC address
Wi-Fi users: Up to 50 simultaneous connections
Wireless Mesh/Network Roaming: Fast Roaming (802.11r), Radio Source Metering (802.11k), BSS Transition Management (802.11v), Client Isolation, Hide SSID, WMM
Wireless MAC filter: Allow list, block list
QR code generator for Wi-Fi: When scanned, the user will automatically connect to the network without having to enter login details
TravelMate: Forward the Wi-Fi hotspot welcome page to subsequent connected device

LAN: 2 × LAN ports, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, Dynamic routing (RIP, OSPF, EIGRP, BGP, NHRP), Policy-driven routing, Routing rules
Network protocols: TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
VoIP pass-through support: H.323 and SIP-alg protocols' NAT helper features enable proper routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Monitoring
Firewall: Port forwarding, traffic rules, custom rules
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable or disable each one, enable/disable auto-configuration, change transfer speed, etc.
Network topology: Visual representation of your network, showing which devices are connected to each other
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static addresses: MAC with wildcards
QoS / Smart Queue Management (SQM): Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Support for over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by sending DNS requests over HTTPS
Network backup: Wi-Fi WAN, VRRP, wired options – all can be used for automatic failover
Load Balancing: Balances internet traffic across multiple WAN connections
Hotspot 2.0: Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
SSHFS: Ability to mount remote file systems via SSH protocol
VRF Support: Initial support for Virtual Routing and Forwarding (VRF)
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scanning protection (SYN-FIN, SYN-RST, X-mas, NULL flag, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
WEB filter: Blacklist to block unwanted websites, whitelist to allow only specific websites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP as certificate generation methods
802.1x: Port-based network access control server

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 IPsec encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP: Client and server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy that adds TLS encryption to existing clients and servers without changing the application code
DMVPN: Method for building scalable IPsec VPNs, supporting Phase 2 and Phase 3 as well as Dual Hub
SSTP: SSTP client support
ZeroTier: ZeroTier VPN client support
WireGuard: WireGuard VPN client and server support
Tinc: Tinc offers encryption, authentication, and compression in its tunnels. Client and server support
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend MODBUS TCP client functionality
Supported data formats: 8-bit: INT, UINT;
16-bit: INT, UINT (MSB or LSB first);
32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extracts parameters from multiple sources and different protocols and sends everything to a single server; Custom LUA scripting allows scripts to use the router's Data to Server functionality

Modbus MQTT Gateway: Enables sending commands and receiving data from MODBUS server via MQTT broker.

Supported modes: Station, Outstation
Supported connection: TCP

Teltonika Networks Web API (beta): Extend the capabilities of your device with configurable API endpoints to retrieve or modify data. More info

CPU: Mediatek 580 MHz, MIPS 24KEc
RAM: 128MB DDR2
FLASH: 16MB serial NOR flash

Operating system: RutOS (Linux based on OpenWrt)
Languages: Busybox shell (ash), Lua 5.1, C, C++
Development tools: SDK with build environment
GPL Customization: Ability to create your own custom firmware with your own branding and web interface
Package Manager: Service for installing additional software

Connector: 3-pin pluggable terminal block
Input voltage: 9-30 VDC, reverse polarity protection, overvoltage protection >31 VDC 10us max
PoE (passive): Passive PoE over spare pair, possible to power via LAN2, not compatible with IEEE802.3af/at/bt, Mode B, 9-30 VDC
Power consumption: Sleep <1 W, max <2 W

Ethernet: 2 x RJ45 ports, 10/100 Mbps
Status LED: 2 x LAN type LED, 1 x Power LED
Power: 1 x 3-pin power connector
Antennas: 1 x RP-SMA for Wi-Fi
Reset: Buttons for restart, user default reset, factory reset

1 x grounding screw

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, event logs, system log, internet status
FOTA: Firmware update from server with automatic notifications
SSH: Versions 1 and 2
Email: Receive status alerts via email
TR-069: Support for multiple ACS implementations
MQTT: MQTT Broker and Publisher
SNMP: Version 1, 2 and 3, SNMP Trap, protection against brute force attacks
JSON-RPC: Management API over HTTP/HTTPS
MODBUS: Status and control over MODBUS TCP
RMS: Teltonika Remote Management System

DLMS support: Standard protocol for exchanging meter data.
Supported modes: Client
Supported connection types: TCP
COSEM: Enables scanning of COSEM objects in meters for automatic detection and configuration.

Housing: Aluminum Dimensions (WxHxD): 113.1 x 25 x 68.6 mm
Weight: 142.3g
Mounting options: Integrated DIN rail, wall mount and flat surface (additional kit required)

Temperature: -40°C to 75°C
Humidity: 10-90% non-condensing
Protection class: IP30

CE, UKCA, CB, FCC/IC

Standards Wi-Fi (2.4 GHz and 5 GHz): 47 CFR Part 15 Subpart C - § 15.247

2 års fabriksgaranti