Teltonika RUTM09

Cellular module: 4G LTE Cat 6 with up to 300 Mbps download / 50 Mbps upload; 3G up to 42 Mbps download / 5.76 Mbps upload
3GPP Release: Release 12
SIM switching: 2 SIM cards, automatic switching when: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection error, SIM idle protection
Status: IMSI, ICCID, operator, operator status, data connection status, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC and MNC
SMS: SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list: Operator block/allow list (per country or separately for operators)
Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
Tape management: Tape lock, display of used tape status
SIM idle protection: Ability to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked
SIM PIN management: Ability to set, change or disable the SIM card PIN
APN: Automatic APN
Bridge: Direct connection (bridge) between the mobile operator's ISP and the device in the LAN
Passthrough: The router assigns its mobile WAN IP address to another device on the LAN

WAN: 1 x WAN port 10/100/1000 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 3 x LAN ports, 10/100/1000 Mbps, complies with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing: Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-driven routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP Passthrough support: H.323 and SIP-alg protocol NAT helper that enables correct routing of VoIP packets
Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for Link Inspection
Firewall: Port forwarding, traffic rules, custom rules, TTL target customization
Firewall Status Page: View all firewall statistics, rules, and rule counters
Port Management: View device ports, enable and disable them, turn auto-configuration on or off, change transmission speed, and more
Network topology: Visual representation of your network showing which devices are connected to which other devices
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcard
QoS / Smart Queue Management (SQM): Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supports over 25 service providers, others can be configured manually
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS requests over HTTPS
Network backup: Mobile, VRRP, wired options, all of which can be used for automatic failover
Load balancing: Equalizes internet traffic across multiple WAN connections
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual or group restrictions, user management, 9 pre-selected customizable themes and the ability to upload and download your own hotspot themes
SSHFS: Ability to mount remote file systems via SSH protocol
VRF Support: Basic support for Virtual Routing and Forwarding (VRF)
Traffic Management: Real-time monitoring, wireless signal graphs, traffic consumption history

802.1x: Port-based network access control (client)
Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempt blocking, time-based login blocking, built-in random password generator
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention: DDOS protection (SYN flood protection, SSH attack protection, HTTP/HTTPS attack protection), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flag, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limitation, customizable period, start time, warning limit, phone number
WEB filter: Blacklist for blocking unwanted websites, whitelist for specifying only allowed sites
Access Control: Flexible access control for SSH, web interface, CLI and Telnet
SSL certificate generation: Let's Encrypt and SCEP as certificate generation methods

OpenVPN: Multiple clients and one server can run simultaneously, 27 encryption methods
OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec: XFRM, IKEv1, IKEv2 with 14 encryption methods:
3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16
GRE: Support for GRE tunnel and GRE tunnel over IPsec
PPTP, L2TP: Client and server instances can run simultaneously
Support for L2TPv3 and L2TP over IPsec
Stunnel: Proxy that adds TLS encryption to existing clients and servers without requiring code changes
DMVPN: Method for building scalable IPsec VPN networks
Support for Phase 2 and Phase 3 as well as Dual Hub
SSTP: SSTP client instance support
ZeroTier: ZeroTier VPN client support
WireGuard: Support for WireGuard VPN client and server
Tinc: Tinc offers encryption, authentication, and compression in its tunnels
Support for both client and server
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPN solutions. Encrypted point-to-point connections using the open WireGuard protocol

Supported modes: Client, Server
Supported connection types: TCP

Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests that read/write to a file in the router and can be used to extend the functionality of the MODBUS TCP client
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol: HTTP(S), MQTT, Azure MQTT
Data to Server: Extract parameters from multiple sources and different protocols, and send them to a single server. Custom LUA scripting allows scripts to use the router's "Data to Server" feature.

Modbus MQTT gateway: Enables sending commands and receiving data from a MODBUS server via an MQTT broker.

Supported modes: Station, Substation (Outstation)
Supported connections: TCP, USB

DLMS support: DLMS – standard protocol for data exchange from electricity meters
Supported modes: Client
Supported connection types: TCP, USB
COSEM: Enables scanning of the meter's COSEM object for automatic identification and configuration

Teltonika Networks Web API support (beta): Extend the capabilities of your device by using a set of configurable API endpoints to retrieve or modify data. For more information, please see the documentation: https://developers.teltonika-networks.com

WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, notifications of available firmware updates, event log, system log, kernel log, internet status
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
Calls: Restart, status, mobile data on/off, output on/off, answer/hang up with timer
Email: Receive service status alerts via email
TR-069: Support for OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP Trap, protection against brute force attacks
JSON-RPC: Handling API via HTTP/HTTPS
RMS: Teltonika Remote Management System (RMS)

ThingWorx: Enables monitoring of: WAN type, WAN IP, mobile carrier name, mobile signal strength, mobile network type
Cumulocity – Cloud of Things: Enables monitoring of: device model, version and serial number, WAN type and IP, mobile Cell ID, ICCID, IMEI, connection type, operator, signal strength. Has reboot and firmware upgrade capabilities
Azure IoT Hub: Can be configured with "Data to server" to send all available parameters to the cloud. Supports "Direct method", which allows to run RutOS API calls via IoT Hub. Also supports Plug and Play integration with Device Provisioning Service for automatic (zero-touch) device registration in IoT Hubs
AWS IoT Core: Tools for interacting with the AWS cloud platform.
Jobs support: Enables calling the device API via AWS Jobs functionality

CPU: MediaTek, Dual-core, 880 MHz, MIPS1004Kc
RAM: 256MB, DDR3
FLASH storage: 16 MB serial NOR flash, 256 MB serial NAND flash

Operating system: RutOS (OpenWrt-based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with development environment included
GPL Customization: You can create your own customized, branded firmware and web application by changing colors, logos, and other elements of our firmware to suit your or your customers' needs
Package Manager: The package manager is a service used to install additional software on the device

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA: NMEA 0183
Server Software: Supported Server Software: TAVL, RMS
Geofencing: Configurable multiple geofence zones

Data speed: USB 2.0
Applications: Samba share, USB-to-serial
External devices: Ability to connect external hard drive, flash drive, additional modem, printer, USB serial adapter
Storage formats: FAT, FAT32, exFAT, NTFS (read only), ext2, ext3, ext4

WEB UI: Update firmware from file, check firmware on server, configuration profiles, backup configuration
FOTA: Firmware update over the internet
RMS: Firmware and configuration update for multiple devices at the same time
Keep settings: Update firmware without losing current configuration
Factory Reset: A full factory reset restores all system settings, including IP address, PIN, and user data to the manufacturer's default configuration.

Input: 1 x digital input, 0–6 V is registered as low logic level, 8–50 V is registered as high logic level
Output: 1 x digital output, open collector, max output 50 V, 300 mA
Events: Email, RMS, SMS
I/O handler: Allows you to set certain I/O conditions to initiate events

Connector: 4-pin industrial DC power connector
Input voltage range: 9 – 50 V DC, reverse polarity protection, overvoltage protection >51 V DC for max. 10 µs
PoE (passive): Ability to power the device via the LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 50 V DC
Power Consumption: Sleep: < 2.65 W, Max: < 9.82 W

Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
Inputs/outputs: 1 x digital input, 1 x digital output on 4-pin power connector
Status LEDs: 3 x WAN type LED, 3 x mobile connection type, 5 x mobile signal strength, 8 x LAN status, 1 x power
SIM: 2 x SIM card slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM card holder
Power: 1 x 4-pin power connector
Antennas: 2 x SMA for mobile, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Button for restart, reset to user defaults and factory reset
Other: 1 x grounding screw

Operating temperature: -40°C to 75°C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory approvals: CE, UKCA, RCM, CB

Standards: EN 55032:2015 + A11:2020 + A1:2020
EN 55035:2017 + A11:2020
EN 61000-3-3:2013 + A1:2019 + A2:2021
EN IEC 61000-3-2:2019 + A1:2021
ESD: EN 61000-4-2: 2009
Radiated immunity: EN IEC 61000-4-3:2020
EFT (Electrical Fast Motion): EN 61000-4-4: 2012
Surge immunity (AC mains power port): EN 61000-4-5:2014 + A1:2017
Surge immunity (AC power line): EN 61000-4-5:2014 + A1:2017
CS (Conducted Disturbance): EN 61000-4-6: 2014
DIP (Voltage dips and interruptions): EN IEC 61000-4-11: 2020

Housing material: Anodized aluminum for chassis and panels
Dimensions (W x H x D): 115 x 44.2 x 95.1 mm
Weight: 457g
Mounting options: DIN rail, wall mount, flat surface (all require additional mounting kit)

Standards: EN 301 908-1 V13.1.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.1.1
EN 303 413 V1.2.1

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

Standards: CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018

2 års fabriksgaranti